sys_bootfailrecovery
The sys_bootfailrecovery variable
tells ALOM what recovery action to take if the system fails to boot after the
value set in the sys_maxbootfail
variable is met.
sys_bootfailrecovery has three
options:
- none � Do nothing except
log the event to the ALOM event log
- powercycle � Power cycle
the host system
- poweroff � Power off the
host system
The default value is none.
From the ALOM command shell:
- To specify a value (or values) for this variable, use the setupsc
command.
- To view the current value, use the showsc
command.
- To change the value(s), use the setsc
command.
Using the scadm utility:
- To view the current value for this variable, use the show
command.
- To change the value, use the set
command.
Related Information
About ALOM configuration variables
Managed system interface variables
showsc
Copyright 2004 Sun Microsystems, Inc. All Rights Reserved.
