Contents|Index|Previous|Next
Selecting
Xrefs
The
following lists the info
commands which operate on menu items.
-
1
(menu-digit)
-
2
...9
-
Within an info
window, pressing a single digit, (such as ‘1’),
selects that menu item, and places its node in the current window. For
convenience, there is one exception; pressing ‘0’
selects the last item in the node’s menu.
-
0
(last-menu-item)
-
Select the last item in the
current node’s menu.
-
m
(menu-item)
-
Reads the name of a menu item
in the echo area and selects its node. Completion is available while reading
the menu label.
-
M-x
find-menu
-
Moves the cursor to the start
of this node’s menu.
The following info
commands operate on note cross references.
-
f
(xref-item)
-
r
-
Reads the name of a note cross
reference in the echo area and selects its node. Completion is available
while reading the cross reference label.
Finally, the next few commands
operate on both menu or note references.
-
Tab
(move-to-next-xref)
-
Moves the cursor to the start
of the next nearest menu item or note reference in the current node. You
can also then use the following command, Return
(select-reference-
this-line), to
select the menu or note reference.
-
M-Tab
(move-to-prev-xref)
-
Moves the cursor to the start
of the nearest previous menu item or note reference in the current node.
-
Enter / Return (select-reference-this-line)
-
Selects the menu item or note
reference appearing on the line where the cursor currently is.
Top|Contents|Index|Previous|Next