A Troubleshooting the Oracle Real Application Clusters Installation Process

This appendix provides troubleshooting information for Oracle Real Application Clusters (Oracle RAC).

A.1 Troubleshooting the Oracle Real Application Clusters Installation

This section contains these topics:

General Installation Issues
Oracle RAC Installation Error Messages
Performing Cluster Diagnostics During Oracle Clusterware Installations
Reviewing the Log of an Installation Session
Configuration Assistant Errors

A.1.1 General Installation Issues

The following is a list of examples of types of errors that can occur during installation. It contains the following issues:

An error occurred while trying to get the disks
Failed to connect to server, Connection refused by server, or Can't open display
Nodes unavailable for selection from the OUI Node Selection screen
Node nodename is unreachable
PROT-8: Failed to import data from specified file to the cluster registry
PRKP-1001: Error starting instance
Time stamp is in the future
YPBINDPROC_DOMAIN: Domain not bound

An error occurred while trying to get the disks: Cause: There is an entry in /etc/oratab pointing to a non-existent Oracle home. The OUI error file should show the following error: "java.io.IOException: /home/oracle/OraHome//bin/kfod: not found"; Action: Remove the entry in /etc/oratab pointing to a non-existing Oracle home.

Failed to connect to server, Connection refused by server, or Can't open display

Cause: These are typical of X Window display errors on Windows or UNIX systems, where xhost is not properly configured.

Action: In a local terminal window, log in as the user that started the X Window session, and enter the following command:

$ xhost fully_qualified_remote_host_name

For example:

$ xhost somehost.example.com

Then, enter the following commands, where workstation_name is the host name or IP address of your workstation.

Bourne, Bash, or Korn shell:

$ DISPLAY=workstation_name:0.0
$ export DISPLAY

To determine if X Window applications display correctly on the local system, enter the following command:

$ xclock

The X clock should appear on your monitor.If the X clock appears, then close the X clock and start Oracle Universal Installer again.

Nodes unavailable for selection from the OUI Node Selection screen: Cause: Oracle Clusterware is either not installed, or the Oracle Clusterware services are not up and running.; Action: Install Oracle Clusterware, or review the status of your Oracle Clusterware. Consider restarting the nodes, as doing so may resolve the problem.

Node nodename is unreachable

Cause: Unavailable IP host

Action: Attempt the following:

Run the command ifconfig -a. Compare the output of this command with the contents of the /etc/hosts file to ensure that the node IP is listed.
Run the command nslookup to see if the host is reachable.
As the oracle user, attempt to connect to the node with ssh or rsh. If you are prompted for a password, then user equivalence is not set up properly. Contact your system administrator, or consult Oracle Clusterware Installation Guide for your platform to complete SSH configuration.

PROT-8: Failed to import data from specified file to the cluster registry: Cause: Insufficient space in an existing Oracle Cluster Registry raw device partition, which causes a migration failure while running rootupgrade.sh. To confirm, look for the error "utopen:12:Not enough space in the backing store" in the log file $ORA_CRS_HOME/log/hostname/client/ocrconfig_pid.log.; Action: Identify a raw device that has 256 MB or more available space. Locate the existing raw device name from /var/opt/oracle/srvConfig.loc, and copy the contents of this raw device to the new device using the command dd.

PRKP-1001: Error starting instance: Cause: Missing ODBC Driver Manager. Associated message is CRS-0215: Could not start resource.; Action: Clean up installation, download and install the ODBC driver from http://www.unixodbc.org, and restart the installation. This is a requirement for Oracle RAC databases, documented in system requirements in the Oracle Clusterware installation guide for your platform.

Time stamp is in the future

Cause: One or more nodes has a different clock time than the local node. If this is the case, then you may see output similar to the following:

time stamp 2005-04-04 14:49:49 is 106 s in the future

Action: Ensure that all member nodes of the cluster have the same clock time.

YPBINDPROC_DOMAIN: Domain not bound

Cause: This error can occur during post-installation testing when a node public network interconnect is pulled out, and the VIP does not fail over. Instead, the node hangs, and users are unable to log in to the system. This error occurs when the Oracle home, listener.ora, Oracle log files, or any action scripts are located on an NAS device or NFS mount, and the name service cache daemon nscd has not been activated.

Action: Enter the following command on all nodes in the cluster to start the nscd service:

/sbin/service  nscd start

A.1.2 Oracle RAC Installation Error Messages

Oracle Real Application Clusters Management Tools Error Messages are in Oracle Real Application Clusters Administration and Deployment Guide.

Note that the user performing the Oracle RAC installation must have membership both in the oinstall group and the OSDBA group (typically oinstall and dba). If this is not the case, then the installation will fail

A.1.3 Performing Cluster Diagnostics During Oracle Clusterware Installations

If Oracle Universal Installer (OUI) does not display the Node Selection page, then perform clusterware diagnostics by running the olsnodes -v command from the binary directory in your Oracle Clusterware home (CRS_home) and analyzing its output. Refer to your clusterware documentation if the detailed output indicates that your clusterware is not running.

In addition, use the following command syntax to check the integrity of the Cluster Manager:

cluvfy comp clumgr -n node_list -verbose

In the preceding syntax example, the variable node_list is the list of nodes in your cluster, separated by commas.

A.1.4 Reviewing the Log of an Installation Session

During an installation, Oracle Universal Installer records all of the actions that it performs in a log file. If you encounter problems during the installation, then review the log file for information about possible causes of the problem.

To view the log file, follow these steps:

If necessary, enter the following command to determine the location of the oraInventory directory:
```
$ cat /opt/oracle/oraInst.loc
```
Enter the following command to determine the name of the log file:
```
$ ls -ltr
```
This command lists the files in the order of creation, with the most recent file shown last. Installer log files have names similar to the following, where date_time indicates the date and time that the installation started:
```
installActionsdate_time.log
```
To view the most recent entries in the log file, where information about a problem is most likely to appear, enter a command similar to the following:
```
$ tail -50 installActions2007-07-20_09-53-22AM.log | more
```
This command displays the last 50 lines in the log file, and enables you to page through them.

If the error displayed by Oracle Universal Installer or listed in the log file indicates a relinking problem, then refer to the following file for more information:
```
$ORACLE_HOME/install/make.log
```

A.1.5 Configuration Assistant Errors

To troubleshoot an installation error that occurs when a configuration assistant is running:

Review the installation log files listed in the section""Reviewing the Log of an Installation Session".

Review the specific configuration assistant log file located in the $ORACLE_HOME/cfgtoollogs directory. Try to fix the issue that caused the error.

If you see the "Fatal Error. Reinstall" message, then look for the cause of the problem by reviewing the log files. Refer to the section "Fatal Errors" for further instructions.

This section contains the following topics:

Configuration Assistant Failures
Fatal Errors

A.1.5.1 Configuration Assistant Failures

Oracle configuration assistant failures are noted at the bottom of the installation screen. The configuration assistant interface displays additional information, if available. The configuration assistant execution status is stored in the following file:

oraInventory_location/logs/installActionsdate_time.log

More details on errors related to the configuration assistant can be found under the following directory:

$ORACLE_HOME/cfgtoollogs

The completion status codes are listed in the following table:

Status Result Code 
Configuration assistant succeeded 0 
Configuration assistant failed 1 
Configuration assistant cancelled -1

A.1.5.2 Fatal Errors

If you receive a fatal error while a configuration assistant is running, you must complete the following tasks:

Deinstall Oracle software.
Correct the cause of the fatal error.
Reinstall the Oracle software.