12 Configuring Notifications

12.1.2.1 Defining E-mail Addresses

An e-mail address can have up to 128 characters. There is no upper limit with the number of e-mail addresses.

To add an e-mail address:

1. From the Grid Control Console, click Preferences. By default the General page is selected.

2. Click Add Another Row to create a new e-mail entry field in the E-mail Addresses table.

3. Specify the e-mail associated with your Enterprise Manager account. All e-mail notifications you receive from Enterprise Manager will be sent to the e-mail addresses you specify.

   For example, user1@oracle.com

   Select the message format for your e-mail address. The Long Format sends a HTML formatted e-mail that contains detailed information. Example 12-3 shows a typical notification that uses the long format.

   The Short Format (Example 12-4) sends a concise, text e-mail that is limited to a configurable number of characters, thereby allowing the e-mail be received as an SMS message or page. The content of the message can be sent entirely in the subject, entirely in the body or split across the subject and body. For example, in the last case, the subject could contain the severity type (for example, Critical) and the target name. The body could contain the time the severity occurred and the severity message. Since the message length is limited, some of this information may be truncated. If truncation has occurred there will be an ellipsis end of the message.

4. Click Apply to save your e-mail address.

Name=myhost.com
Type=Host
Host=myhost.com
Metric=Filesystem Space Available (%)
Mount Point =/usr
Timestamp=06-OCT-2006 16:27:05 US/Pacific
Severity=Warning
Message=Filesystem / has only 76.07% available space
Rule Name=Host Availability and Critical States
Rule Owner=SYSMAN

Subject is :
EM:Unreachable Start:myhost
Body is :
Nov 16, 2006 2:02:19 PM EST:Agent is Unreachable (REASON = Connection refused) 
but the host is UP

More about Short E-mail Format

Enterprise Manager does not directly support paging, SMS, etc., but instead relies on external gateways to, for example, perform the conversion from e-mail to page.

Entries in the emoms.properties file define the size and format of the short e-mail.

You must establish the maximum size your device can support and whether the message is sent in subject, body or both

emoms.properties Entries for a Short E-mail Format

# The maximum size of a short format email
# em.notification.short_format_length=155
# The format of the short email. It can be set to subject, body or both.
#
# When set to subject the entire message is sent in the subject i.e.
#  EM:<severity>:<target>:<message>:<timestamp>
# When set to body the entire message is sent in the body i.e.
#  EM:<severity>:<target>:<message>:<timestamp>
# When set to both the message is split i.e. the subject contains
#  EM:<severity>:<target>
# and the body contains
#  <message>:<timestamp>
# In all cases the message is truncated to the length specified in the
# em.notification.short_format_length parameter
# em.notification.short_format=both

12.1.2.2 Setting Up a Notification Schedule

Once you have defined your e-mail notification addresses, you will need to define a notification schedule. For example, if your e-mail addresses are user1@oracle.com, user2@oracle.com, user3@oracle.com, you can choose to use one or more of these e-mail addresses for each time period in your notification schedule.

A notification schedule is a repeating schedule used to specify your on-call schedule—the days and time periods and e-mail addresses that should be used by Enterprise Manager to send notifications to you. Each administrator has exactly one notification schedule. When a notification needs to be sent to an administrator, Enterprise Manager consults that administrator's notification schedule to determine the e-mail address to be used. Depending on whether you are Super Administrator or a regular Enterprise Manager administrator, the process of defining a notification schedule differs slightly.

If you are a regular Enterprise Manager administrator and are defining your own notification schedule:

1. From the Enterprise Manager Grid Control, click Preferences at the top of the page. By default the General page is selected.

2. Click Notification Schedule in the vertical navigation bar. Your Notification Schedule page appears.

3. Follow the directions on the Notification Schedule page to specify when you want to receive e-mails.

12.1.2.3 Subscribe to Receive E-mail for Notification Rules

A notification rule is a user-defined rule that defines the criteria by which notifications should be sent for alerts, policy violations, corrective action execution status, and job execution status. Specifically, in each rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. During notification rule creation, you specify criteria such as the targets you are interested in, their monitored metrics, associated alert severity conditions (clear, warning, critical), policy violations, corrective action execution status, or job execution status, and the associated notification method.

To subscribe to a notification rule you create, while creating the rule, go to the Methods page and check the "Send Me E-mail" option.

Out-of-Box Notification Rules

Enterprise Manager Grid control comes with out-of-box notification rules that cover the most common alert conditions. When you install the Oracle Management Service, you are given the option to receive e-mail notifications for critical alerts. If you choose this option, and if an e-mail address for the SYSMAN user was specified, then some default notification rules are created that cover the availability and critical states for common target types and would also be configured to send e-mail notifications to the SYSMAN e-mail address for the conditions defined in the notification rules.

You can access the out-of-box notification rules by clicking on Preferences on any page in the Enterprise Manager console and clicking Public Rules in the vertical navigation bar. If the conditions defined in the out-of-box notification rules meet your requirements, you can simply subscribe to receive e-mail notifications for the conditions defined in the rule by clicking on Subscribe column in the row of the Public Rules table that corresponds to the notification rule that you are interested in. Click Apply to save your changes.

Table 12-1 lists all the default notification rules. These are all owned by the SYSMAN user and are public rules.

Creating Your Own Notification Rules

If you find that the default notification rules do not meet your needs, you can define your own custom rules. The following procedure documents the process of notification rule creation for non-Super Administrators.

To create your own notification rule:

1. From the Enterprise Manager Grid Control, click Preferences.

2. Click My Rules in the vertical navigation bar.

   If you are not logged in as an administrator with Super Administrator privileges, you will see a link for My Rules instead of Rules as in the case of an administrator with Super Administrator privileges.

3. Click Create.

   Enterprise Manager displays the Create Notification Rule pages. Enter the requisite information on each page to create your notification rule.

   When you specify the notification rule properties, check Make Public in the General page if you want other non-privileged users to be able to view and share that rule. For example, it allows other administrators to later specify that they should receive e-mail for this rule.

   When you specify the notification rule, you will only be able to choose from e-mail and SNMP traps. Specifying custom commands and PL/SQL procedures is an option that is only available to Super Administrators. To receive e-mail notifications for conditions defined in the rule, go to the Methods page and select the Send Me E-Mail option.

12.2.1.1 Adding a Notification Method based on an OS Command or Script

Complete the following four steps to define a notification method based on an OS command or script.

Step 1: Define your OS command or script.

You can specify an OS command or script that will be called by the notification system. You can use target and alert or policy violation context information, corrective action execution status and job execution status within the body of the script. Passing metric severity attributes (severity level, type, notification rule, rule owner, or rule owner, and so on) or policy violation information to OS commands/scripts allows you to customize automated responses to alerts or policy violations. For example, if an OS script opens a trouble ticket for an in-house support trouble ticket system, you will want to pass severity levels (critical, warning, and so on) to the script to open a trouble ticket with the appropriate details and escalate the problem. For more information on passing specific types of information to OS Command or Scripts, see

• "Passing Alert and Policy Violation Information to an OS Command or Script"

• "Passing Corrective Action Execution Status to an OS Command or Script"

• "Passing Job Execution Status to an OS Command or Script"

Step 2: Deploy the script on each Management Service host.

You must deploy the OS Command or Script on each Management Service host machine that connects to the Management Repository. The OS Command is run as the user who started the Management Service.

The OS Command or Script should be deployed on the same location on each Management Service host machine. The OS Command should be an absolute path, for example, /u1/bin/logSeverity.sh. The command is run by the user who started the Management Service. If an error is encountered during the running of the OS Command, the Notification System can be instructed to retry the sending of the notification to the OS Command by returning an exit code of 100. The procedure is initially retried after one minute, then two minutes, then three minutes and so on, until the notification is a day old, at which point it will be purged.

Example 12-5 shows the parameter in emoms.properties that controls how long the OS Command can execute without being killed by the Management Service. This is to prevent OS Commands from running for an inordinate length of time and blocking the delivery of other notifications. By default the command is allowed to run for 30 seconds before it is killed.

# The amount of time in seconds after which an OS Command started by the
# Notification System will be killed if it has not exited
# em.notification.os_cmd_timeout=30

Step 3: Register your OS Command or Script as a new Notification Method.

Add this OS command as a notification method that can be called in Notification Rules. Log in as a Super Administrator, click Setup and then Notification Methods from the vertical navigation bar. From this page, you can define a new notification based on the 'OS Command' type. See "Adding a Notification Method based on an OS Command or Script" .

The following information is required for each OS command notification method:

• Name

• Description

  Both Name and Description should be clear and intuitive so that the function of the method is clear to other administrators.

• OS Command

You must enter the full path of the OS command or script in the OS command field (for example, /u1/bin/myscript.sh). For environments with multiple Management Services, the path must be exactly the same on each machine that has a Management Service. Command line parameters can be included after the full path (for example, /u1/bin/myscript.sh arg1 arg2).

Example 12-6 shows information required for the notification method.

Name Trouble Ticketing
Description Notification method to log trouble ticket for a severity occurrence
OS Command /private/mozart/bin/logTicket.sh

Step 4: Assign the notification method to a rule.

You can edit an existing rule (or create a new notification rule), then go to the Methods page. In the list of Advanced Notification Methods, select your notification method and click 'Assign Method to Rule'. To assign multiple rules to a method or methods to a single rule, see "Assigning Rules to Methods" or "Assigning Methods to Rules".

Passing Alert and Policy Violation Information to an OS Command or Script

The notification system passes severity information to an OS script or executable using system environment variables.

Conventions used to access environmental variables vary depending on the operating system:

• UNIX: $ENV_VARIABLE

• Windows:%ENV_VARIABLE%

The notification system sets the following environment variables before calling the script. The script can then use any or all of these variables within the logic of the script.

Your script may reference some or all of these variables.

The sample OS script shown in Example 12-7 appends environment variable entries to a log file. In this example, the script logs a severity occurrence to a file server. If the file server is unreachable then an exit code of 100 is returned to force the Oracle Management Service Notification System to retry the notification

#!/bin/ksh

LOG_FILE=/net/myhost/logs/severity.log
if test -f $LOG_FILE
then
echo $TARGET_NAME $MESSAGE $TIMESTAMP >> $LOG_FILE
else
   exit 100
fi

Example 12-8 shows an OS script that logs alert information to the file 'alertmsg.txt'. The file is saved to the /u1/results directory.

#!/usr/bin/sh
echo "Alert logged:" > /u1/results/alertmsg.txt
echo "\n" >> /u1/results/alertmsg.txt
echo "target name is " $TARGET_NAME >> /u1/results/alertmsg.txt
echo "target type is " $TARGET_TYPE >> /u1/results/alertmsg.txt
echo "target is on host " $HOST >> /u1/results/alertmsg.txt
echo "metric in alert is " $METRIC >> /u1/results/alertmsg.txt
echo "metric index is " $KEY_VALUE >> /u1/results/alertmsg.txt
echo "timestamp is " $TIMESTAMP >> /u1/results/alertmsg.txt
echo "severity is " $SEVERITY >> /u1/results/alertmsg.txt
echo "message is " $MESSAGE >> /u1/results/alertmsg.txt
echo "notification rule is " $RULE_NAME >> /u1/results/alertmsg.txt
echo "rule owner is " $RULE_OWNER >> /u1/results/alertmsg.txt
exit 0

Example 12-9 shows a script that sends an alert to an HP OpenView console from Enterprise Manager Grid Control. When a metric alert is triggered, the Enterprise Manager Grid Control displays the alert. The HP OpenView script is then called, invoking opcmsg and forwarding the information to the HP OpenView management server.

/opt/OV/bin/OpC/opcmsg severity="$SEVERITY" app=OEM msg_grp=Oracle msg_text="$MESSAGE" object="$TARGET"

12.2.1.2 Adding a Notification Method Based on a PL/SQL Procedure

Complete the following four steps to define a notification method based on a PL/SQL procedure.

Step 1: Define the PL/SQL procedure.

The procedure must have one of the following signatures depending on the type of notification that will be received.

For alerts and policy violations:

PROCEDURE p(severity IN MGMT_NOTIFY_SEVERITY)

For job execution status changes:

PROCEDURE p(job_status_change IN MGMT_NOTIFY_JOB)

For corrective action status changes:

PROCEDURE p(ca_status_change IN MGMT_NOTIFY_CORRECTIVE_ACTION)

For more information on passing specific types of information to scripts or PL/SQL procedures, see the following sections:

"Passing Alert and Policy Violation Information to a PL/SQL Procedure"

"Passing Corrective Action Status Change Information"

"Passing Job Execution Status Information"

Step 2: Create the PL/SQL procedure on the Management Repository.

Create the PL/SQL procedure on the repository database using one of the following procedure specification:

PROCEDURE p(severity IN MGMT_NOTIFY_SEVERITY)
PROCEDURE p(job_status_change IN MGMT_NOTIFY_JOB)
PROCEDURE p(ca_status_change IN MGMT_NOTIFY_CORRECTIVE_ACTION)

The PL/SQL procedure must be created on the repository database using the database account of the repository owner (such as SYSMAN)

If an error is encountered during the running of the procedure, the Notification System can be instructed to retry the sending of the notification to the procedure by raising a user defined exception that uses the error code -20000. See Example 12-11, "PL/SQL Procedure Using a Severity Code". The procedure initially retried after one minute, then two minutes, then three minutes and so on, until the notification is a day old, at which point it will be purged.

Step 3: Register your PL/SQL procedure as a new notification method.

Log in as a Super Administrator, click Setup and then Notification Methods from the vertical navigation bar. From this page, you can define a new notification based on 'PL/SQL Procedure'. See "Adding a Notification Method Based on a PL/SQL Procedure".

Make sure to use a fully qualified name that includes the schema owner, package name and procedure name. The procedure will be executed by the repository owner and so the repository owner must have execute permission on the procedure.

Create a notification method based on your PL/SQL procedure. The following information is required when defining the method:

• Name

• Description

• PL/SQL Procedure

You must enter a fully qualified procedure name (for example, OWNER.PKGNAME.PROCNAME) and ensure that the owner of the Management Repository has execute privilege on the procedure.

An example of the required information is shown in Example 12-10.

Name Open trouble ticket
Description Notification method to open a trouble ticket in the event
PLSQL Procedure ticket_sys.ticket_ops.open_ticket

Step 4: Assign the notification method to a rule.

You can edit an existing rule (or create a new notification rule), then go to the Methods page. In the list of Advanced Notification Methods, select your notification method and click 'Assign Method to Rule'. To assign multiple rules to a method or methods to a single rule, see "Assigning Rules to Methods" or "Assigning Methods to Rules".

There can be more than one PL/SQL-based method configured for your Enterprise Manager environment.

Information about the severity types that relate to a target's availability, and how metric severity and policy violation information is passed to the PLSQL procedure is covered in the next section.

Passing Alert and Policy Violation Information to a PL/SQL Procedure

Passing metric severity attributes (severity level, type, notification rule, rule owner, or rule owner, and so on) or policy violation information to PL/SQL procedures allows you to customize automated responses to alerts or policy violations.

The notification system passes information about metric severities or policy violations to a PL/SQL procedure using the MGMT_NOTIFY_SEVERITY object. An instance of this object is created for every alert or policy violation. When an alert or policy violation occurs, the notification system calls the PL/SQL procedure associated with the notification rule and passes the populated object to the procedure. The procedure is then able to access the fields of the MGMT_NOTIFY_SEVERITY object that has been passed to it.

The following table lists all metric severity attributes that can be passed:

When a severity occurs for the target, the notification system creates an instance of the MGMT_NOTIFY_SEVERITY object and populates it with values from the severity. The severity codes in Table 12-4 have been defined as constants in the MGMT_GLOBAL package and can be used to determine the type of severity in the severity_code field of the MGMT_NOTIFY_SEVERITY object.

CREATE TABLE alert_log (target_name VARCHAR2(64),
alert_msg VARCHAR2(4000),
occured DATE);

PROCEDURE LOG_CRITICAL_ALERTS(severity IN MGMT_NOTIFY_SEVERITY)
IS
BEGIN
-- Log all critical severities
   IF severity.severity_code = MGMT_GLOBAL.G_SEVERITY_CRITICAL
   THEN
        BEGIN
                INSERT INTO alert_log (target_name, alert_msg, occured)
                VALUES (severity.target_name, severity.message,
                                severity.collection_timestamp);
        EXCEPTION
        WHEN OTHERS
        THEN
        -- If there are any problems then get the notification retried
                RAISE_APPLICATION_ERROR(-20000, 'Please retry');
                END;
                COMMIT;
   END IF;
END LOG_CRITICAL_ALERTS;

12.2.1.3 Adding a Notification Method Based on an SNMP Trap

Enterprise Manager supports integration with third-party management tools through the SNMP. For example, you can use SNMP to notify a third-party application that a selected metric has exceeded its threshold.

The trap is an SNMP Version 1 trap and is described by the MIB definition shown at the end of this chapter. See "Management Information Base (MIB)".

For more comprehensive configuration information, see the documentation specific to your platform; SNMP configuration differs from platform to platform.

Step 1: Define a new notification method based on an SNMP trap.

Log in to Enterprise Manager as a Super Administrator. Click Setup and then click Notification Method from the vertical navigation bar to access the Notification Methods page. From this page you can add a new method based on an SNMP trap.

You must provide the name of the host (machine) on which the SNMP master agent is running and other details as shown in the following example. In Example 12-12, the SNMP host will receive your SNMP traps.

Name HP OpenView Console
Description Notification method to send trap to HP OpenView console
SNMP Trap Host Name machine1.us.oracle.com
SNMP Host Port 162
SNMP Community public
This SNMP host will receive your SNMP traps.

Metric severity information will be passed as a series of variables in the SNMP trap.

An example SNMP Trap is shown in Example 12-13. Each piece of information is sent as a variable embedded in the SNMP Trap.

Tue Oct 28 05:00:02 2006

Command: 4
   Enterprise: 1.3.6.1.4.1.111.15.2
   Agent: 138.1.6.200
   Generic Trap: 6
   Specific Trap: 1
   Time Stamp: 8464:39.99
   Count: 11

Name: 1.3.6.1.4.1.111.15.1.1.1.2.1
   Kind: OctetString
   Value: "mydatabase"

Name: 1.3.6.1.4.1.111.15.1.1.1.3.1
   Kind: OctetString
   Value: "Database"

Name: 1.3.6.1.4.1.111.15.1.1.1.4.1
  Kind: OctetString
  Value: "myhost.com"

Name: 1.3.6.1.4.1.111.15.1.1.1.5.1
   Kind: OctetString
   Value: "Owner's Invalid Object Count"

Name: 1.3.6.1.4.1.111.15.1.1.1.6.1
   Kind: OctetString
   Value: "Invalid Object Owner"

Name: 1.3.6.1.4.1.111.15.1.1.1.7.1
   Kind: OctetString
   Value: "SYS"

Name: 1.3.6.1.4.1.111.15.1.1.1.8.1
   Kind: OctetString
   Value: "28-OCT-2006 04:59:10 (US/Eastern GMT)"

Name: 1.3.6.1.4.1.111.15.1.1.1.9.1
   Kind: OctetString
   Value: "Warning"

Name: 1.3.6.1.4.1.111.15.1.1.1.10.1
   Kind: OctetString
   Value: "12 object(s) are invalid in the SYS schema."

Name: 1.3.6.1.4.1.111.15.1.1.1.11.1
   Kind: OctetString
   Value: "Database Metrics"

Name: 1.3.6.1.4.1.111.15.1.1.1.12.1
   Kind: OctetString
   Value: "SYSMAN"

Step 2: Assign the notification method to a rule.

You can edit an existing rule (or create a new notification rule), then go to the Methods page. In the list of Advanced Notification Methods, select your notification method and click 'Assign Method to Rule'. To assign multiple rules to a method or methods to a rule, see "Assigning Rules to Methods" or "Assigning Methods to Rules".

12.7.2.1 Variable Name

Syntax

Maps to the SYNTAX element of SNMP MIB definition, Version 2.

Max-Access

Maps to the MAX-ACCESS element of SNMP MIB definition, Version 2.

Status

Maps to the STATUS element of SNMP MIB definition, Version 2.

Explanation

Describes the function, use and precise derivation of the variable. (For example, a variable might be derived from a particular configuration file parameter or performance table field.) When appropriate, incorporates the DESCRIPTION part of the MIB definition, Version 2.

Typical Range

Describes the typical, rather than theoretical, range of the variable. For example, while integer values for many MIB variables can theoretically range up to 4294967295, a typical range in an actual installation will vary to a lesser extent. On the other hand, some variable values for a large database can actually exceed this "theoretical" limit (a "wraparound"). Specifying that a variable value typically ranges from 0 to 1,000 or 1,000 to 3 billion will help the third-party developer to develop the most useful graphical display for the variable.

Significance

Describes the significance of the variable when monitoring a typical installation. Alternative ratings are Very Important, Important, Less Important, or Not Normally Used. Clearly, the DBA will want to monitor some variables more closely than others. However, which variables fall into this category can vary from installation to installation, depending on the application, the size of the database, and on the DBA's objectives. Nevertheless, assessing a variable's significance relative to the other variables in the MIB can help third-party developers focus their efforts on those variables of most interest to the most DBAs.

Related Variables

Lists other variables in this MIB, or other MIBs implemented by Oracle, that relate in some way to this variable. For example, the value of this variable might derive from that of another MIB variable. Or perhaps the value of this variable varies inversely to that of another variable. Knowing this information, third-party developers can develop useful graphic displays of related MIB variables.

Suggested Presentation

Suggests how this variable can be presented most usefully to the DBA using the management application: as a simple value, as a gauge, or as an alarm, for example.

12.7.2.2 MIB Definition

Example 12-16 shows a typical MIB definition used by Enterprise Manager.

ORACLE-ENTERPRISE-MANAGER-4-MIB DEFINITIONS ::= BEGIN
IMPORTS
    TRAP-TYPE
        FROM RFC-1215
    DisplayString
        FROM RFC1213-MIB
    OBJECT-TYPE
        FROM RFC-1212
    enterprises
        FROM RFC1155-SMI;
oracle OBJECT IDENTIFIER ::= { enterprises  111 }
oraEM4 OBJECT IDENTIFIER ::= { oracle  15 }
oraEM4Objects OBJECT IDENTIFIER ::= { oraEM4  1 }
oraEM4AlertTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF OraEM4AlertEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
     "Information on alerts generated by Oracle Enterprise Manager. This table is
 not queryable; it exists only to document the variables included in the
 oraEM4Alert trap.  Each trap contains a single instance of each variable in the
 table."
    ::= { oraEM4Objects  1 }
oraEM4AlertEntry OBJECT-TYPE
    SYNTAX  OraEM4AlertEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
     "Information about a particular Oracle Enterprise Manager alert."
    INDEX   { oraEM4AlertIndex }
    ::= { oraEM4AlertTable  1 }
OraEM4AlertEntry ::=
    SEQUENCE {
        oraEM4AlertIndex
            INTEGER,
        oraEM4AlertTargetName
       DisplayString,
        oraEM4AlertTargetType
       DisplayString,
        oraEM4AlertHostName
       DisplayString,
        oraEM4AlertMetricName
       DisplayString,
        oraEM4AlertKeyName
       DisplayString,
        oraEM4AlertKeyValue
       DisplayString,
        oraEM4AlertTimeStamp
       DisplayString,
        oraEM4AlertSeverity
       DisplayString,
        oraEM4AlertMessage
       DisplayString,
        oraEM4AlertRuleName
       DisplayString
        oraEM4AlertRuleOwner
       DisplayString
    oraEM4AlertMetricValue
           DisplayString,
        oraEM4AlertContext
           DisplayString
    }
oraEM4AlertIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "Index of a particular alert, unique only at the moment an alert is generated."
    ::= { oraEM4AlertEntry  1 }
oraEM4AlertTargetName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the target to which this alert applies."
    ::= { oraEM4AlertEntry  2 }
oraEM4AlertTargetType OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The type of the target to which this alert applies."
    ::= { oraEM4AlertEntry  3 }
oraEM4AlertHostName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the host on which this alert originated."
    ::= { oraEM4AlertEntry  4 }
oraEM4AlertMetricName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the metric or policy which generated this alert."
    ::= { oraEM4AlertEntry  5 }
oraEM4AlertKeyName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the key-column, if present, for the metric which generated this alert."
    ::= { oraEM4AlertEntry  6 }
oraEM4AlertKeyValue OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The value of the key-column, if present, for the metric which generated this alert."
    ::= { oraEM4AlertEntry  7 }
oraEM4AlertTimeStamp OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The time at which this alert was generated."
    ::= { oraEM4AlertEntry  8 }
oraEM4AlertSeverity OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The severity of the alert e.g. Critical."
    ::= { oraEM4AlertEntry  9 }
oraEM4AlertMessage OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The message associated with the alert."
    ::= { oraEM4AlertEntry  10 }
oraEM4AlertRuleName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the notification rule that caused this notification."
    ::= { oraEM4AlertEntry  11 }
oraEM4AlertRuleOwner OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The owner of the notification rule that caused this notification."
    ::= { oraEM4AlertEntry  12 }
oraEM4AlertMetricValue OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The value of the metric which caused this alert to be generated."
    ::= { oraEM4AlertEntry  13 }
oraEM4AlertContext OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "A comma separated list of metric column names and values associated with the metric that caused this alert to be generated."
    ::= { oraEM4AlertEntry  14 }
oraEM4Traps OBJECT IDENTIFIER ::= { oraEM4  2 }
oraEM4Alert TRAP-TYPE
    ENTERPRISE  oraEM4Traps
    VARIABLES   { oraEM4AlertTargetName, oraEM4AlertTargetType,
                  oraEM4AlertHostName, oraEM4AlertMetricName,
                  oraEM4AlertKeyName, oraEM4AlertKeyValue, oraEM4AlertTimeStamp,
                  oraEM4AlertSeverity, oraEM4AlertMessage,
                  oraEM4AlertRuleName, oraEM4AlertRuleOwner,
                  oraEM4AlertMetricValue, oraEM4AlertContext }
    DESCRIPTION
     "The variables included in the oraEM4Alert trap."
    ::= 1
oraEM4JobAlertTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF OraEM4JobAlertEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
     "Information on alerts generated by Oracle Enterprise Manager. This table is
 not queryable; it exists only to document the variables included in the
 oraEM4JobAlert trap.  Each trap contains a single instance of each variable in
 the table."
    ::= { oraEM4Objects  2 }
oraEM4JobAlertEntry OBJECT-TYPE
    SYNTAX  OraEM4AlertEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
     "Information about a particular Oracle Enterprise Manager alert."
    INDEX   { oraEM4JobAlertIndex }
    ::= { oraEM4JobAlertTable  1 }
OraEM4JobAlertEntry ::=
    SEQUENCE {
        oraEM4JobAlertIndex
            INTEGER,
        oraEM4JobAlertJobName
       DisplayString,
        oraEM4JobAlertJobOwner
       DisplayString,
        oraEM4JobAlertJobType
       DisplayString,
        oraEM4JobAlertJobStatus
       DisplayString,
        oraEM4JobAlertTargets
       DisplayString,
        oraEM4JobAlertTimeStamp
       DisplayString,
        oraEM4JobAlertRuleName
       DisplayString
        oraEM4JobAlertRuleOwner
       DisplayString,
    oraEM4JobAlertMetricName
           DisplayString,
    oraEM4JobAlertMetricValue
           DisplayString,
        oraEM4JobAlertContext
           DisplayString,
        oraEM4JobAlertKeyName
       DisplayString,
        oraEM4JobAlertKeyValue
       DisplayString,
        oraEM4JobAlertSeverity
       DisplayString
    }
oraEM4JobAlertIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "Index of a particular alert, unique only at the moment an alert is
 generated."
    ::= { oraEM4JobAlertEntry  1 }
oraEM4JobAlertJobName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the job to which this alert applies."
    ::= { oraEM4JobAlertEntry  2 }
oraEM4JobAlertJobOwner OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The owner of the job to which this alert applies."
    ::= { oraEM4JobAlertEntry  3 }
oraEM4JobAlertJobType OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The type of the job to which this alert applies."
    ::= { oraEM4JobAlertEntry  4 }
oraEM4JobAlertJobStatus OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The status of the job to which this alert applies."
    ::= { oraEM4JobAlertEntry  5 }
oraEM4JobAlertTargets OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "A comma separated list of target to which this alert applies."
    ::= { oraEM4JobAlertEntry  6 }
oraEM4JobAlertTimeStamp OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The time at which this job status changed causing this alert."
    ::= { oraEM4JobAlertEntry  7 }
oraEM4JobAlertRuleName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the notification rule that caused this notification."
    ::= { oraEM4JobAlertEntry  8 }
oraEM4JobAlertRuleOwner OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The owner of the notification rule that caused this notification."
    ::= { oraEM4JobAlertEntry  9 }
oraEM4JobAlertMetricName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the metric or policy which caused the Corrective Action to run
 that caused this alert."
    ::= { oraEM4JobAlertEntry  10 }
oraEM4JobAlertMetricValue OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The value of the metric which caused the Corrective Action to run that
 caused this alert."
    ::= { oraEM4JobAlertEntry  11 }
oraEM4JobAlertContext OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "A comma separated list of metric column names and values associated with the
 metric which caused the Corrective Action to run that caused this alert."
    ::= { oraEM4JobAlertEntry  12 }
oraEM4JobAlertKeyName OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The name of the key-column, if present, for the metric which caused the
 Corrective Action to run that generated this alert."
    ::= { oraEM4JobAlertEntry  13 }
oraEM4JobAlertKeyValue OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The value of the key-column, if present, for the metric which caused the
 Corrective Action to run that generated this alert."
    ::= { oraEM4JobAlertEntry  14 }
oraEM4JobAlertSeverity OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
     "The severity of the metric which caused the Corrective Action to run that
 generated this alert e.g. Critical."
    ::= { oraEM4JobAlertEntry  15 }
oraEM4JobAlert TRAP-TYPE
    ENTERPRISE  oraEM4Traps
    VARIABLES   { oraEM4JobAlertJobName, oraEM4JobAlertJobOwner,
                  oraEM4JobAlertJobType, oraEM4JobAlertJobStatus,
                  oraEM4JobAlertTargets, oraEM4JobAlertTimeStamp,
                  oraEM4JobAlertRuleName, oraEM4JobAlertRuleOwner,
                  oraEM4JobAlertMetricName, oraEM4JobAlertMetricValue,
                  oraEM4JobAlertContext, oraEM4JobAlertKeyName,
                  oraEM4JobAlertKeyValue, oraEM4JobAlertSeverity }
    DESCRIPTION
     "The variables included in the oraEM4JobAlert trap."
    ::= 2
END