Use the showsc command to display information about the ALOM software configuration and firmware version.
Note: You do not need user permissions to use this command.
To display all configuration information for ALOM, type the following command at the sc> prompt:
sc> showsc
To display the values for a particular configuration variable, type the following command at the sc> prompt:
sc> showsc param
where param is the param option.
For example, xir is the current value for the sys_autorestart configuration variable:
sc> showsc sys_autorestart
xir
The -v option provides additional details about the specified variable.
For example, to display the ALOM version, type either of the following:
sc> showsc version
Advanced Lights Out Manager
sc> showsc -v version
Advanced Lights Out Manager
SC Firmware version: 1.1.0
SC Bootmon version: 1.1.0
SC Bootmon Build Release: 37
SC bootmon checksum: C717B0FB
SC Bootmon built May 13 2003, 15:05:48
SC Build Release: 37
SC firmware checksum: 1BECB05A
SC firmware built May 13 2003, 15:05:33
SC firmware flashupdate MAY 19 2003, 14:55:38
SC System Memory Size: 8 MB
SC NVRAM Version = a
SC hardware type: 1
The showsc command uses the following options. If you type showsc without using any options, ALOM displays all of its configuration variables.
Option | Description |
-v | When used with the param option, the -v option might display more detailed information about the specified configuration variable (depending on the variable). |
param | Directs the showsc command to display the value of the configuration variable you specified. |